SOLENOID SAFETY GAS VALVES (double action)
Solenoid safety gas valve (double action) is a device designed for control and regulation of gaseous mediums supply in gas burners of hot water and steam boilers, melting and drying furnaces, gas heaters and other gas consuming devices where the multi-step control of the flow is required.
Double action solenoid safety gas valves are composed of two shut-off safety gas valves and additional devices functioning in one housing, which allows combining various functions in one product:
- two shut-off safety gas valves
- shut-off safety gas valve – three-position solenoid safety gas valve (high/low gas flow mode)
- two shut-off safety gas valves and smooth opening function
- two shut-off safety gas valves and gas flow regulator (electromechanical or manual)
- multiblock unit based on the double valve.
ADVANTAGES (as compared with valve block units, assembled with single items):
- smaller overall dimensions (up to 30%);
- low total factor of hydraulic resistance;
- reduced time spent on installation and maintenance.
DIAMETER NOMINAL:
- 15; 20; 25; 32; 40; 50.
OPERATING PRESSURE:
- from 0 up to 6 bar (up to 0,6 Mpa).
CONNECTION TYPE:
- flange;
- coupling.
CLIMATIC VERSIONS:
- -30…+60 °С;
- -45…+60 °С;
- -60…+60 °С.
AMBIENT TEMPERATURE:
- -60…+70 °С (standard);
- -45…+120 °С (upon individual request).
ADDITIONAL FUNCTIONS AND DEVICES:
- can be equipped with position indicators of the shutter, pressure switches, manual or electromechanical flow regulator, density (leak- tightness) control valve;
- for connection of pressure switches, manometers, impulse tubes or other devices and instruments, the holes with G1/4” thread closed with plugs, are provided in the housing.
EXPLOSION PROOF VERSIONS:
- general industrial usage (protection degree IP65);
- explosion proof (protection degree IP67).
-------------------------------------
If you need help selecting necessary equipment, please visit our website www.termobrest.ru or contact our specialists via e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (product sales department and logistics).
SOLENOID SAFETY GAS VALVES BLOCK UNIT
Solenoid safety gas valves block unit is a set of solenoid safety gas valves and other gas fittings unit assembled into a single gas train (gas filter, pressure regulator-stabilizer, safety relief gas valve, safety shut-off gas valve, pressure switch, etc.) and motorized gas valve
Motorized gas valve included in the unit controls the gas supply to the gas burner and regulates the gas flow rate.
Upon customer's request, the valve block can be manufactured complete with additional automation devices (pressure switches, position indicators of valves), as well as in general industrial and waterproof versions.
The gas block can be designed according to the scheme, which provides the possibility to check the tightness of the valves included in the block before ignition of the burner.
FLOW CONTROL RANGE:
- 0.05 to 100 % of nominal.
TYPE OF REGULATION:
- proportional;
- position control;
- manual regulation.
DIAMETER NOMINAL:
- DN 15÷300.
HOUSING MATERIAL:
- steel: DN 15÷300;
- iron cast: DN-150, DN-200;
- aluminum: DN 15÷200.
CLIMATIC VERSION:
- -30…+60 °С – installation in irregularly heated rooms;
- -45…+60 °С – installation under roof;
- -60…+60 °С – installation under roof;
- -60…+60 °С – outdoor installation.
AMBIENT OPERATING TEMPERATURE:
All solenoid safety gas valves block units manufactured by TERMOBREST are supplied in a version with ambient operating temperature from -60 up to +70 ° C.
Upon customer’s individual request, solenoid safety gas valves block units can be manufactured with ambient operating temperature from -45 up to +120 ° C.
Upon customer’s individual request, the valves block units with the read-off position indicators can be manufactured with ambient operating temperature from -45 up to +90 ° C (the upper range is limited by the permissible operating limit (range) of the read-off position indicator).
-------------------------------------
If you need help to select necessary equipment, you should visit our web-site or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).