GAS PRESSURE REGULATORS-STABILIZERS
Pressure regulators-stabilizer is a device designed for reduction, regulation and maintenance of the pressure (flow) of hydro carbonated gases, gaseous phases of liquefied gases, compressed air as well as other non-aggressive gases constant at the outlet within prescribed limits regardless of inlet pressure. Pressure regulators-stabilizers can operate without external power source.
FIELD OF APPLICATION:
Gas distributing plants, heating plants, gas reciprocating engine power plants, gas burners and other equivalent equipment and installations, which require reduction and maintenance of the constant value of gas flow rate pressure.
MAXIMUM OPERATING PRESSURE:
- up to 6 bar
DIAMETER NOMINAL:
DN 15÷150
HOUSING MATERIAL:
- aluminum;
- steel.
VERSIONS:
1. Standard version (DN 15÷150) - designed for reduction, regulation and maintenance of the gas pressure within prescribed limits.
2. Regulator with in-built safety relief valve (DN 15÷150) – designed for reduction, regulation and maintenance of the gas pressure within prescribed limits and has function of gas discharge to the atmosphere (gas path) in case if controlled pressure is exceeded.
3. Combined regulator both with safety shut-off (DN25÷100) – designed for regulation and maintenance of the gas pressure within prescribed limits, and also stops gas supply, when prescribed gas outlet pressure is exceeded.
4. Combined regulator, both with safety shut-off valve and safety relief valve – designed for regulation and maintenance of the gas pressure within prescribed limits; has function of gas discharge to the atmosphere (gas path) when controlled pressure is exceeded, and also stops gas supply, when prescribed gas outlet pressure is exceeded;
Combined regulators-stabilizers can be manufactured in following versions:
- with safety shut-off valve and safety relief valve in separate housings.
- with safety shut-off valve and in-built safety relief valve.
- with safety shut-off valve and safety relief valve in one housing (monoblock unit version).
- combined household regulator, both with safety shut-off valve and safety relief valve. Such regulators are applied at the gas supply systems of residential and small-apartment houses as a part of household gas distributing plants.
5. Zero pressure regulator (DN 15÷150) - designed for proportional regulation of gas flow rate depending on rarefaction at the outlet or at the control point of pipeline, and maintenance of gas-air mixture in a constant ratio.
6. Gas-air pressure ratio regulator (DN 15÷150) - designed to obtain a gas-air mixture in the required ratio and automatically maintain this ratio.
CLIMATIC VERSIONS:
- -30…+60 °С
- -40…+60 °С
OPERATING MEDIUM TEMPERATURE:
- from -30 to +70 °С.
-------------------------------------
If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).
GAS MIXERS
Gas mixer is applied for mixing fuel (gas) and air for optimal combustion process in gas engine or any other gas consumption device.
Combustion optimization process is aimed at increasing and improving the level of efficiency of gas combustion units and devices, as well as reducing the level of emissions.
FIELD OF APPLICATION:
Gas engines, gas engine generators, gas burners and other similar devices.
TYPE OF FUEL SUPPLY REGULATION:
Automatic regulation
Manual regulation
Fuel supply regulation is carried out in automatic mode by means of electric power drive or in manual mode.
Fuel supply is regulated by change of size of supply gas pipeline. Fuel in the mixer is sprayed through special holes located in the nozzle of the body and mixed with air to the required proportion.
FLOW RATE OF AIR (DEPEND ON SIZE OF MIXER HOUSING):
- 90…650 ncm/h;
- 250…1400 ncm/h;
- 700…3000 ncm/h;
- 2300…4800 ncm/h.
OPERATING MEDIUM TEMPERATURE:
- -40 °С…+80 °С.
CLIMATIC VERSION:
- -30…+60 °С;
- -45…+60 °С;
- -60…+60 °С.
Gas mixer can be installed both on horizontal and vertical sections of pipeline.
-------------------------------------
If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).