GAS PRESSURE REGULATORS-STABILIZERS
Pressure regulators-stabilizer is a device designed for reduction, regulation and maintenance of the pressure (flow) of hydro carbonated gases, gaseous phases of liquefied gases, compressed air as well as other non-aggressive gases constant at the outlet within prescribed limits regardless of inlet pressure. Pressure regulators-stabilizers can operate without external power source.
FIELD OF APPLICATION:
Gas distributing plants, heating plants, gas reciprocating engine power plants, gas burners and other equivalent equipment and installations, which require reduction and maintenance of the constant value of gas flow rate pressure.
MAXIMUM OPERATING PRESSURE:
- up to 6 bar
DIAMETER NOMINAL:
DN 15÷150
HOUSING MATERIAL:
- aluminum;
- steel.
VERSIONS:
1. Standard version (DN 15÷150) - designed for reduction, regulation and maintenance of the gas pressure within prescribed limits.
2. Regulator with in-built safety relief valve (DN 15÷150) – designed for reduction, regulation and maintenance of the gas pressure within prescribed limits and has function of gas discharge to the atmosphere (gas path) in case if controlled pressure is exceeded.
3. Combined regulator both with safety shut-off (DN25÷100) – designed for regulation and maintenance of the gas pressure within prescribed limits, and also stops gas supply, when prescribed gas outlet pressure is exceeded.
4. Combined regulator, both with safety shut-off valve and safety relief valve – designed for regulation and maintenance of the gas pressure within prescribed limits; has function of gas discharge to the atmosphere (gas path) when controlled pressure is exceeded, and also stops gas supply, when prescribed gas outlet pressure is exceeded;
Combined regulators-stabilizers can be manufactured in following versions:
- with safety shut-off valve and safety relief valve in separate housings.
- with safety shut-off valve and in-built safety relief valve.
- with safety shut-off valve and safety relief valve in one housing (monoblock unit version).
- combined household regulator, both with safety shut-off valve and safety relief valve. Such regulators are applied at the gas supply systems of residential and small-apartment houses as a part of household gas distributing plants.
5. Zero pressure regulator (DN 15÷150) - designed for proportional regulation of gas flow rate depending on rarefaction at the outlet or at the control point of pipeline, and maintenance of gas-air mixture in a constant ratio.
6. Gas-air pressure ratio regulator (DN 15÷150) - designed to obtain a gas-air mixture in the required ratio and automatically maintain this ratio.
CLIMATIC VERSIONS:
- -30…+60 °С
- -40…+60 °С
OPERATING MEDIUM TEMPERATURE:
- from -30 to +70 °С.
-------------------------------------
If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).
SOLENOID SAFETY GAS VALVES BLOCK UNIT
Solenoid safety gas valves block unit is a set of solenoid safety gas valves and other gas fittings unit assembled into a single gas train (gas filter, pressure regulator-stabilizer, safety relief gas valve, safety shut-off gas valve, pressure switch, etc.) and motorized gas valve
Motorized gas valve included in the unit controls the gas supply to the gas burner and regulates the gas flow rate.
Upon customer's request, the valve block can be manufactured complete with additional automation devices (pressure switches, position indicators of valves), as well as in general industrial and waterproof versions.
The gas block can be designed according to the scheme, which provides the possibility to check the tightness of the valves included in the block before ignition of the burner.
FLOW CONTROL RANGE:
- 0.05 to 100 % of nominal.
TYPE OF REGULATION:
- proportional;
- position control;
- manual regulation.
DIAMETER NOMINAL:
- DN 15÷300.
HOUSING MATERIAL:
- steel: DN 15÷300;
- iron cast: DN-150, DN-200;
- aluminum: DN 15÷200.
CLIMATIC VERSION:
- -30…+60 °С – installation in irregularly heated rooms;
- -45…+60 °С – installation under roof;
- -60…+60 °С – installation under roof;
- -60…+60 °С – outdoor installation.
AMBIENT OPERATING TEMPERATURE:
All solenoid safety gas valves block units manufactured by TERMOBREST are supplied in a version with ambient operating temperature from -60 up to +70 ° C.
Upon customer’s individual request, solenoid safety gas valves block units can be manufactured with ambient operating temperature from -45 up to +120 ° C.
Upon customer’s individual request, the valves block units with the read-off position indicators can be manufactured with ambient operating temperature from -45 up to +90 ° C (the upper range is limited by the permissible operating limit (range) of the read-off position indicator).
-------------------------------------
If you need help to select necessary equipment, you should visit our web-site or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).