Three-position solenoid safety gas valves
Three-position solenoid safety gas valve is a device designed for remote control of flow of non-aggressive gaseous mediums in three different modes:
- maximum flow rate mode;
- average (intermediate) flow rate mode;
- off mode.
Three-position solenoid safety gas valves are applied at automated systems of gradual gas flow control.
Such valves combine shut-off (cut-off) unit with manual gas flow regulator and unit of average (intermediate) gas flow in one housing. This design ensures gradual gas flow control as well as manual adjustment of average gas flow rate from 10 to 60 %.
Customized valves can be manufactured with two flow regulators that allow to adjust gas flow rate from 10 to 100 %.
OPERATING PRESSURE:
- from 0 to 3 bar (up to 0,3 mPa).
DIAMETER NOMINAL:
- DN 20÷50.
HOUSING MATERIAL:
ALUMINUM
STEEL
Valves in aluminum housings are applied at thermal power facilities (boiler houses, furnace rooms etc.), and also by manufacturers of gas equipment (modular boiler houses, boilers, burners, furnaces, flare facility etc). Low weight, cost and small dimensions make valves in aluminum housings practical in application.
Valves in steel housing are applied primarily at large power plants (heat and thermal power plants, condensation power plants etc). Steel housings are highly resistant to static and dynamic loads due to requirements of equipment application at large power plants.
CLIMATIC VERSION:
- -30…+60 °С – installation in irregularly heated space;
- -45…+60 °С – installation under cover;
- -60…+60 °С – installation under cover;
- -60…+60 °С – outdoor installation (only for explosion proof version);
OPERATING ENVIRONMENT TEMPERATURE:
- -60…+70 °С (standard version);
- -45…+120 °С (customized version).
ADDITIONAL FUNCTIONS AND DEVICES:
- all gas valves can be equipped with external read-off position indicators (opened/closed);
- for additional devices such as manometers, pressure switches, pulse tubes etc. connection valves are equipped with plugged threaded connections G1/4”.
HOUSING VERSIONS:
- flange;
- coupling.
EXPLOSION PROOF VERSION:
- general purpose industrial version;
- explosion proof version.
General purpose industrial version of valves is applied at all gas facilities, where there are no special requirements for ensuring explosion safety of electrical equipment.
Explosion proof version of valves is applied at the facilities and premises with special protective measures requirements upon designing, manufacturing and operating of electrical plants.
-------------------------------------
If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).
SOLENOID SAFETY GAS VALVES BLOCK UNIT
Solenoid safety gas valves block unit is a set of solenoid safety gas valves and other gas fittings unit assembled into a single gas train (gas filter, pressure regulator-stabilizer, safety relief gas valve, safety shut-off gas valve, pressure switch, etc.) and motorized gas valve
Motorized gas valve included in the unit controls the gas supply to the gas burner and regulates the gas flow rate.
Upon customer's request, the valve block can be manufactured complete with additional automation devices (pressure switches, position indicators of valves), as well as in general industrial and waterproof versions.
The gas block can be designed according to the scheme, which provides the possibility to check the tightness of the valves included in the block before ignition of the burner.
FLOW CONTROL RANGE:
- 0.05 to 100 % of nominal.
TYPE OF REGULATION:
- proportional;
- position control;
- manual regulation.
DIAMETER NOMINAL:
- DN 15÷300.
HOUSING MATERIAL:
- steel: DN 15÷300;
- iron cast: DN-150, DN-200;
- aluminum: DN 15÷200.
CLIMATIC VERSION:
- -30…+60 °С – installation in irregularly heated rooms;
- -45…+60 °С – installation under roof;
- -60…+60 °С – installation under roof;
- -60…+60 °С – outdoor installation.
AMBIENT OPERATING TEMPERATURE:
All solenoid safety gas valves block units manufactured by TERMOBREST are supplied in a version with ambient operating temperature from -60 up to +70 ° C.
Upon customer’s individual request, solenoid safety gas valves block units can be manufactured with ambient operating temperature from -45 up to +120 ° C.
Upon customer’s individual request, the valves block units with the read-off position indicators can be manufactured with ambient operating temperature from -45 up to +90 ° C (the upper range is limited by the permissible operating limit (range) of the read-off position indicator).
-------------------------------------
If you need help to select necessary equipment, you should visit our web-site or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).