Quality policy

Since its establishment and up to nowadays TERMOBREST has been adhering to the following three guiding principles: QUALITY, RELIABILITY and SAFETY. Our product quality complies with the highest standards applied to gas fitting production.

Each product manufactured under TERMOBREST trademark passes 100 % multistage control. At least nine-year average product life cycle is one of the quality and reliability indices. Our production quality is confirmed by all necessary certificates of conformity applied in gas industry:

TERMOBREST quality management system is certified against ISO 9001–2015.

Within the 34-year period, we have been abided by three main principles of QUALITY, RELIABILITY AND SAFETY. Such approach enabled us to join the leaders of gas industry and take our proper place in the markets of the Eurasian continent. Today TERMOBREST trademark is a guarantor of maximum reliability and safety of gas systems.

We use the best raw materials and suppliesQuality control at all stages of productionQuality control at all stages of productionQuality control at all stages of productionQuality control at all stages of productionOnly successfully passed tests give the "green light" to the productOnly successfully passed tests give the "green light" to the productOnly successfully passed tests give the "green light" to the productOnly successfully passed tests give the "green light" to the productOnly successfully passed tests give the "green light" to the product

Every product manufactured under TERMOBREST trademark passes 100% multistage quality tests. The key indicator of quality and reliability of the products is average service life – no less than 9 years. Оur quality is confirmed by certificates:

 

Three-position solenoid safety gas valves

Three-position solenoid safety gas valve is a device designed for remote control of flow of non-aggressive gaseous mediums in three different modes:

  • maximum flow rate mode;
  • average (intermediate) flow rate mode;
  • off mode.

Three-position solenoid safety gas valves are applied at automated systems of gradual gas flow control.

Such valves combine shut-off (cut-off) unit with manual gas flow regulator and unit of average (intermediate) gas flow in one housing. This design ensures gradual gas flow control as well as manual adjustment of average gas flow rate from 10 to 60 %.

Customized valves can be manufactured with two flow regulators that allow to adjust gas flow rate from 10 to 100 %.

OPERATING PRESSURE:

  • from 0 to 3 bar (up to 0,3 mPa).

DIAMETER NOMINAL:

  • DN 20÷50.

HOUSING MATERIAL:

ALUMINUM

STEEL

Valves in aluminum housings are applied at thermal power facilities (boiler houses, furnace rooms etc.), and also by manufacturers of gas equipment (modular boiler houses, boilers, burners, furnaces, flare facility etc).  Low weight, cost and small dimensions make valves in aluminum housings practical in application.

Valves in steel housing are applied primarily at large power plants (heat and thermal power plants, condensation power plants etc). Steel housings are highly resistant to static and dynamic loads due to requirements of equipment application at large power plants.

CLIMATIC VERSION:

  • -30…+60 °С – installation in irregularly heated space;
  • -45…+60 °С – installation under cover;
  • -60…+60 °С – installation under cover;
  • -60…+60 °С – outdoor installation (only for explosion proof version);

OPERATING ENVIRONMENT TEMPERATURE:

  • -60…+70 °С (standard version);
  • -45…+120 °С (customized version).

ADDITIONAL FUNCTIONS AND DEVICES:

  • all gas valves can be equipped with external read-off position indicators (opened/closed);
  • for additional devices such as manometers, pressure switches, pulse tubes etc. connection valves are equipped with plugged threaded connections G1/4”.

 HOUSING VERSIONS:

  • flange;
  • coupling.

EXPLOSION PROOF VERSION:

  • general purpose industrial version;
  • explosion proof version.

General purpose industrial version of valves is applied at all gas facilities, where there are no special requirements for ensuring explosion safety of electrical equipment.

Explosion proof version of valves is applied at the facilities and premises with special protective measures requirements upon designing, manufacturing and operating of electrical plants.

-------------------------------------

If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail  info@termobrest.ru or by phone:

+375 (162) 53-64-13 (technical consultation line);

+375 (162) 53-64-76 (sales and logistics department).