Quality policy

Since its establishment and up to nowadays TERMOBREST has been adhering to the following three guiding principles: QUALITY, RELIABILITY and SAFETY. Our product quality complies with the highest standards applied to gas fitting production.

Each product manufactured under TERMOBREST trademark passes 100 % multistage control. At least nine-year average product life cycle is one of the quality and reliability indices. Our production quality is confirmed by all necessary certificates of conformity applied in gas industry:

TERMOBREST quality management system is certified against ISO 9001–2015.

Within the 34-year period, we have been abided by three main principles of QUALITY, RELIABILITY AND SAFETY. Such approach enabled us to join the leaders of gas industry and take our proper place in the markets of the Eurasian continent. Today TERMOBREST trademark is a guarantor of maximum reliability and safety of gas systems.

We use the best raw materials and suppliesQuality control at all stages of productionQuality control at all stages of productionQuality control at all stages of productionQuality control at all stages of productionOnly successfully passed tests give the "green light" to the productOnly successfully passed tests give the "green light" to the productOnly successfully passed tests give the "green light" to the productOnly successfully passed tests give the "green light" to the productOnly successfully passed tests give the "green light" to the product

Every product manufactured under TERMOBREST trademark passes 100% multistage quality tests. The key indicator of quality and reliability of the products is average service life – no less than 9 years. Оur quality is confirmed by certificates:

 

GAS MIXERS

Gas mixer is applied for mixing fuel (gas) and air for optimal combustion process in gas engine or any other gas consumption device.

Combustion optimization process is aimed at increasing and improving the level of efficiency of gas combustion units and devices, as well as reducing the level of emissions.

FIELD OF APPLICATION:

Gas engines, gas engine generators, gas burners and other similar devices.

TYPE OF FUEL SUPPLY REGULATION:

Automatic regulation

Manual regulation

Fuel supply regulation is carried out in automatic mode by means of electric power drive or in manual mode.

Fuel supply is regulated by change of size of supply gas pipeline. Fuel in the mixer is sprayed through special holes located in the nozzle of the body and mixed with air to the required proportion.

FLOW RATE OF AIR (DEPEND ON SIZE OF MIXER HOUSING):

  • 90…650 ncm/h;
  • 250…1400 ncm/h;
  • 700…3000 ncm/h;
  • 2300…4800 ncm/h.

OPERATING MEDIUM TEMPERATURE:

  • -40 °С…+80 °С.

 

CLIMATIC VERSION:

  • -30…+60 °С;
  • -45…+60 °С;
  • -60…+60 °С.

 

Gas mixer can be installed both on horizontal and vertical sections of pipeline.

-------------------------------------

If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail info@termobrest.ru or by phone:

+375 (162) 53-64-13 (technical consultation line);

+375 (162) 53-64-76 (sales and logistics department).