Gas filter is a device designed for gas purification from mechanical particles (dust, rust (corrosion), sand fire scale and other solid particles) and it is installed in front of the shut-off and control fittings unit of gas-burning devices of hot water boilers, heat generators, infrared heaters and other gas-fired installations. It can be applied in measuring instruments (flow meters, meters, manometers, etc.), gas household heating appliances (gas stoves, boilers, direct-flow water heaters, etc.) in gas control units and installations, as well as in other technological gas-air lines, where the operating environment purification from the mechanical particles is required.
An application of gas filters on the pipeline allows a significant service life increase and reliability of the shut-off and control fittings unit, measuring instruments and other devices.
OPERATING PRESSURE:
Gas filters (FH series) are manufactured in versions with maximum operating pressure up to 3 bar (0.3 MPa), up to 6 bar (0.6 MPa) and up to 16 bar (1.6 MPa). Maximum operating pressure is the highest overpressure, when the declared filtration characteristics of the operating environment are provided.
DIAMETER NOMINAL:
From 15 up to 300 mm
HOUSING MATERIAL:
CLIMATIC VERSION:
HOUSING VERSION:
Linear (standard) version
Angle version
Standard (linear) version of gas filters is applied onto the straight sections of the pipeline. Angle version of the filter is used at facilities with limited space (gas-distributing plant, distribution pressure reducing station, etc.). Application of the angle version can reduce the number of welds and joints when arranging the corner sections of the pipeline.
Flange connection (DN15÷300)
Coupling connection (DN15÷50)
Gas filters with flange connection are manufactured with PN 6 (standard) or PN 16 (upon request) flanges.
FILTRATION DEGREE:
TERMOBREST filters are manufactured in standard version with a filtration degree of 50 microns.
We can also produce filters with different filtration degrees: 2 microns, 5 microns, 10 microns, 20 microns, 400 microns, 600 microns, 800 microns.
THERE ARE TWO TYPES OF FILTERING ELEMENTS (CARTRIDGES), WHICH ARE USED IN THE FH SERIES MODELS:
CONTROL OF FILTERING PADS (ELEMENTS) CONTAMINATION DEGREE:
To control the contamination degree (pressure drop) of filtering element different types of contamination indicators can be installed on the filter:
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Arrow type contamination indicator – control of the degree of contamination of the filtering element is carried out on a scale (dial plate) with indicating arrows. The scale is divided into segments that indicate the actual pressure drop on the filter from 0 to 30 kPa. There are the indicating drop values through 5 kPa (0, 5, 10, 15, 20, 25, 30 kPa) on the scale for the convenience of contamination control.
The black arrow indicates the actual pressure drop on the filter at the exact moment of operation. It is required to set manually the permissible pressure drop on the filter using red arrow on the scale. When the black and red arrows reach or coincide, the filtering element should be cleaned or replaced.
Depending on the position of the indicator’s visual scale concerning the direction of gas flow through the filter or pipeline, the arrow type contamination indicators are available in two versions: "left-to-right" and "right-to-left".
ADDITIONAL FUNCTIONS AND DEVICES:
All models of gas filters (DN 25÷300 mm) can be equipped with a condensate outlet for draining condensate without demounting the filter or dismantling it from the pipeline.
-------------------------------------
If you need help to select necessary equipment, you should visit our web-site or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).
Pressure switches are used as excess-pressure and under-pressure differential monitoring devices for natural gas, liquified gas and air in gas supplying and ventilation systems.
Pressure switches monitor extremely slight pressure differences and provide for electrical disconnection of a system when the set value is reached.
TECHNICAL DATA:
Diaphragm type series DPD (excess-pressure):
Diaphragm type series DPD-Н (excess-pressure):
Diaphragm type series DPD-Т (under-pressure):
Electronic type series DPD-Е (excess-pressure):
Electronic type series DPD-Е…Т (under-pressure):
Electronic type series DPD-16 (excess-pressure):
CLIMATIC VERSION:
OPERATING MEDIUM TEMPERATURE:
-------------------------------------
If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).