Solenoid safety gas valves block unit is a set of solenoid safety gas valves and other gas fittings unit assembled into a single gas train (gas filter, pressure regulator-stabilizer, motorized gas valve, safety relief gas valve, safety shut-off gas valve, pressure switch, etc.).
FIELD OF APPLICATION:
Solenoid safety gas valves block units are designed for monitoring and regulation of the gas environment (medium) supply in gas burners of hot water and steam boilers, melting and drying furnaces, gas heaters and other gas consuming devices.
DIAMETER NOMINAL:
HOUSING MATERIAL:
COMBINED GAS VALVES BLOCK UNIT CAN BE EQUIPPED WITH ADDITIONAL DEVICES:
VERSION:
CLIMATIC VERSION:
AMBIENT OPERATING TEMPERATURE:
All solenoid safety gas valves block units manufactured by TERMOBREST are supplied in a version with ambient operating temperature from -60 up to +70 ° C.
Upon customer’s individual request, solenoid safety gas valves block units can be manufactured with ambient operating temperature from -45 up to +120 ° C.
Upon customer’s individual request, the valves block units with the read-off position indicators can be manufactured with ambient operating temperature from -45 up to +90 ° C (the upper range is limited by the permissible operating limit (range) of the read-off position indicator).
-------------------------------------
If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).
Leak-tightness control unit is a device designed for automatic checking of the gas valves block units before ignition of the burner and ensures a safe start-up of the boiler.
It is used to control the leak-tightness of the gas train (gas valves block units) of industrial boiler burners and similar gas-burning devices.
HOUSING TYPE:
(fig. 1)
(fig. 2)
Figure 1 – housing version with IP41 protection degree for installation in a cabinet with mounting on a din-rail (СВР-1 series);
Figure 2 – version with IP54 protection degree with the possibility of outdoor installation under roof (СВР-2 series).
FUNCTIONALITY:
MAIN TECHNICAL CHARACTERISTICS:
Power source | 220 V, 50 Hz; 24 V DC |
Maximum current through the contact relays | 5 А |
Maximum switched voltage by contacts | 250 V |
Testing time range | 10…990 sec (кратно 10) |
Interface with remote computer | RS-485 |
Power consumption | no more than 6 VA |
Average service life | 9 years |
Climatic version | -30…60 °С |
-------------------------------------
If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail info@termobrest.ru or by phone:
+375 (162) 53-64-13 (technical consultation line);
+375 (162) 53-64-76 (sales and logistics department).