Production

Our manufactured product range includes more than 12 000 types, type-sizes and modifications, which due to their performance form a group of high-quality shutoff and control safety valves for gaseous and liquid mediums.

All products manufactured by TERMOBREST engineers are in-house design. More than 85% of products are exported. In close cooperation with consumers, our specialists are working to improve the existing products and expand product range.

A broad range of climatic modifications is an outstanding feature of TERMOBREST products. It provides an opportunity to use the equipment practically in all climatic zones at ambient temperature range from –60 С° to +40 С°.

Energy saving is among our primary objectives too. Our specialists together with German engineers have developed and implemented a new technology enabling to reduce valve’s energy consumption by 50%. Thus, our products are both reliable and environmentally friendly.

Production in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operationProduction of TERMOBREST in operation

Three-position solenoid safety gas valves

Three-position solenoid safety gas valve is a device designed for remote control of flow of non-aggressive gaseous mediums in three different modes:

  • maximum flow rate mode;
  • average (intermediate) flow rate mode;
  • off mode.

Three-position solenoid safety gas valves are applied at automated systems of gradual gas flow control.

Such valves combine shut-off (cut-off) unit with manual gas flow regulator and unit of average (intermediate) gas flow in one housing. This design ensures gradual gas flow control as well as manual adjustment of average gas flow rate from 10 to 60 %.

Customized valves can be manufactured with two flow regulators that allow to adjust gas flow rate from 10 to 100 %.

OPERATING PRESSURE:

  • from 0 to 3 bar (up to 0,3 mPa).

DIAMETER NOMINAL:

  • DN 20÷50.

HOUSING MATERIAL:

ALUMINUM

STEEL

Valves in aluminum housings are applied at thermal power facilities (boiler houses, furnace rooms etc.), and also by manufacturers of gas equipment (modular boiler houses, boilers, burners, furnaces, flare facility etc).  Low weight, cost and small dimensions make valves in aluminum housings practical in application.

Valves in steel housing are applied primarily at large power plants (heat and thermal power plants, condensation power plants etc). Steel housings are highly resistant to static and dynamic loads due to requirements of equipment application at large power plants.

CLIMATIC VERSION:

  • -30…+60 °С – installation in irregularly heated space;
  • -45…+60 °С – installation under cover;
  • -60…+60 °С – installation under cover;
  • -60…+60 °С – outdoor installation (only for explosion proof version);

OPERATING ENVIRONMENT TEMPERATURE:

  • -60…+70 °С (standard version);
  • -45…+120 °С (customized version).

ADDITIONAL FUNCTIONS AND DEVICES:

  • all gas valves can be equipped with external read-off position indicators (opened/closed);
  • for additional devices such as manometers, pressure switches, pulse tubes etc. connection valves are equipped with plugged threaded connections G1/4”.

 HOUSING VERSIONS:

  • flange;
  • coupling.

EXPLOSION PROOF VERSION:

  • general purpose industrial version;
  • explosion proof version.

General purpose industrial version of valves is applied at all gas facilities, where there are no special requirements for ensuring explosion safety of electrical equipment.

Explosion proof version of valves is applied at the facilities and premises with special protective measures requirements upon designing, manufacturing and operating of electrical plants.

-------------------------------------

If you need help selecting necessary equipment, please visit our web-site www.termobrest.ru or contact our specialists by e-mail  info@termobrest.ru or by phone:

+375 (162) 53-64-13 (technical consultation line);

+375 (162) 53-64-76 (sales and logistics department).